| Customization: | Available |
|---|---|
| After-sales Service: | on Line |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| NO. | Fault | Possible Reason | Recovery Method | |
| 1 | Elevator stop working/does not have enough strength to perform | Hopper belt loosing | Switch off machine, cut off power, tighten belt | |
| Triangle belt loosing | ||||
| Elevator shaft twist with entanglements | Switch off machine, cut off power, take out entanglements | |||
| Grain separating board on the conveying pipe twisted with entanglements | Switch off machine, cut off power, take off the observing window and take out entanglements | |||
| 2 | Grain come out asymmetry from grain scattering box | Position of grain separation plate on conveying pipe is incorrect | Set grain separating handle to the appropriate position | |
| 3 | Low flow speed in sieving trunk (Reverse setting when high flow speed in sieving trunk) | Angle of trunk slope relatively small | Switch off machine, rise two supporting angle steel at front | Default setting is fine, normally do not need these adjusting |
| The angle between the axes of vibration motor against horizontal level is unsuitable | Switch off machine, cut off power, adjusting the angle smaller | |||
| Amplitude of vibration motor is too small | Switch off machine, cut off power, open wind cover of the vibration motors, expend the overly area of the fan shaped metals | |||
| Supporting frame is not horizontally balanced | Adjust the supporting frame by using lead screws, make sure frame is horizontally balanced | |||
| 4 | Mixture with small amount of impurities happens at one or more outlets of selected grains | One or more screen damaged | Replace or repair the damaged screen | |
| Sieve blockage | ||||
| Wrong mesh size of screen | Replace screen | |||
| 5 | All Motor Working in Reversed Direction | wrong order L N of power | Exchange L/N | |
){kind=link}